OBDII – Vehicle Tracker

OBD2 Vehicle Tracker

Download PDF

Description :

A GPS-GSM based Tracking and Monitoring System with OBD-II( Onboard Vehicle Diagnostics standards 2) interface, which adds remote diagnostics capabilities to our existing GPS Vehicle tracking platform. Along with vehicle tracking data, other vehicle-related parameters, and diagnostic information like Error codes, Real time speed, RPM, Fuel level, Real Time Odometer can be acquired through OBD-II interface and sent to server through GSM/GPRS for Processing. With Current OBD-II interface becoming standardized with all the vehicle manufacturers, this solution opens up an opportunity to offer a wide range of services & applications to users and huge business opportunity within in automobile ecosystem.

Specification :

Chipset MT6260
Memory 8 MB solid state Flash, 100K Erase and Program Cycle, 10 year data retention
GSM Module Quad Band GSM 850/900/1800/1900Mhz,DCS GPRS: class10 Coding Scheme CS1 to CS4
GPS Module GPS:66 acquisition-/ 22 tracking channels, Ultra high tracking/navigation sensitivity: - 165dBm1, Inbuilt patch antenna, 5 Meters Accuracy.
Antennas Internal Antennas
Communication Interface TCP/IP on GPRS
Record Storage/buffer 10000 Tracking Records ( may vary based on configuration and paremeter chosen)
Ports 1-USB Device type, Standard OBD-II J1962 Connector with CAN and K-Line
Speed Sensor GPS(default), Through OBD Speed Data
SIM Interface Supports SIM card: 1.8V & 3V / Embedded SIM (optional)
GPRS Packet Data Class 10 ; Class 8 (Optional), Coding Scheme CS1 to CS4
LED Indication Processing, GSM, GPS, USB Detection
Connectors Standard OBD-II connector
Power Supply Wide DC input voltage range (9V - 32V)
Current Consumption 60mA during tracking and 30mA during standby
Internal Battery 500mAh, 4 to 6 Hr backup.
Protocol supported CAN( 11 bit/29 bit), K-Line
Temperature Operating: -20°C to +60°C
Storage: -20°C to +85°C (Without Battery)
Dimension(L x W x H) in mm 55 X 35 X 30
Weight 150g
FOTA Firmware upgrade over the air available
Protocol supported CAN, KWP and J1939
Motion Sensor 3 Axis Accelerometer