FM 5300 -Vehicle Tracker

FM 5300 Vehicle Tracker

Download PDF

Description :

The FM5300 is a Gps tracker device with many features and can meet all the needs that may have a business.You can send the GPS coordinates via the mobile GSM / GPRS network and in case of loss of the GSM Association has the ability to store up to 16,000 coordinates and only place to reconnect the device to the network of the mobile phone to send stored data via GPRS. So you’ll have lost data (vehicle coordinates, sensors data, etc.It has rechargeable battery and special controller for power management. Also, there is an option to use an external backup battery so it can work up to 48 hours.You will know you went your vehicle stopped and for how long, as well as all the way from the start to the end of the shift.The device FM 5300 sets new safety innovations in the detection, monitoring and surveillance vehicles. It fully supports SMS features / GPRS / internet data transmission that can be widely used worldwide
It is the most complete anti-theft system and you turn off your car in case of theft by a command from a distance.The device automatically enters Auto safety area Geofencing whenever you park.If moved without putting the key in the vehicle device will send a message S.O.S sms on your mobile that was moved.The FM 5300 device receives simultaneously several sensors for temperature, fuel control opening and closing of doors etc.Also you can elanchete when the engine of the vehicle is open or closed, what is the driver via I-Buttons, monitor fuel consumption, battery status, temperature radiator and also when the doors are open or closed.

Features:

  • GPS/GLONASS coordinates and I/O data acquisition
  • Real Time tracking
  • Smart algorithm of data acquisition (time, distance, angle, ignition and event based)
  • Sending acquired data via GPRS (TCP/IP and UDP/IP protocols)
  • 16000 records saving into flash memory
  • Two RJ45 (RS232) ports
  • RJ45 ports can be used to connect two LLS digital fuel sensor without a concentrator
  • RFID reader can be connected to use it for authentification purposes
  • Garmin navigation can be connected to send direct messages and new destinations to driver
  • Smart algorithm of GPRS connections (GPRS traffic saving)
  • Operating in roaming networks (preferred GSM providers list)
  • Events on I/O detection and sending via GPRS or SMS.
  • Scheduled 24 coordinates SMS sending
  • One configuration file enables convenient configuration
  • Data reading from CAN Bus (FMS standard)
  • CAN Bus Autoscan funcionality which enables to automatically configure CAN bus data reading and therefore simplifies configuration process
  • Multi geofence zones (rectangular or circle)
  • Autogeofencing funcionality which automatically draws geozones of certain radius, decreasing risk of car theft
  • Deep Sleep mode (saving vehicle‘s accumulator)
  • Firmware update and configuration using USB interface
  • OTA (firmware updating via GPRS)
  • Built-in 550 mA battery
  • Accelerometer
  • Small and easy to mount case
  • Roaming dependant operation (GPRS traffic saving in roaming zones)
  • Acceleration detection (harsh breaking and accelerate measuring)
  • Operation mode presets
    • Advanced overspeeding detection
    • Driver behavior monitoring (acceleration/breaking/cornering notification to
      minimize the vehicle exploitation costs)
    • Driver identification (1-Wire® iButton ID key)
    • Immobilizer scenario which enables to start engine only after reading the 1-Wire® iButton ID
    • Authorized driving which enables to start engine only after reading the 1-Wire® iButton ID from authorized ID list.

Specification:-

GSM/GPRS
  • Quad‐band 900/1800 MHz; 850/1900 MHz
  • GPRS class 10 (up to 85,6 kbps)
  • SMS (text/data)
GPS/GLONASS
  • NMEA‐0183, GGA, GGL, GSA, GSV, RMC, VTG protocol compatible
  • 32 channel receiver
  • ‐162 dBm sensitivity

Interface

  • 4 Digital Inputs for object status monitoring
  • 4 Analog Inputs (switchable 10 V or 30 V range, 12 bit resolution)
  • 4 Digital Open‐drain Outputs (controlling external relays, LED, buzzers, etc.)
  • 1‐Wire® interface protocol
  • CAN interface
  • Power supply (+10…+30) V DC
  • 2 Status LEDs
  • USB interface
  • 2x RS232 port
  • Configuration and firmware update (FOTA and via USB cable)
  • External GSM antenna
  • External GNSS antenna
  • Optional internal (or external) rechargeable NiMh battery with charge controller
  • Voice interface (Rj11)
  • Dimensions: L(104,1mm)xW(76,8mm)xH(31,5mm)
  • Movement sensor